Automatic capsule filling machine metering disc replacement procedure
Replace the metering plate: Remove the weighing pan, press the appropriate replacement manual metering plate, rod calibrated with calibration, according to a new benchmarking standard depth of each station unscrew the filler rod and tighten. The plane is determined as follows:
a. installed metering disk, spin from filling lever to the appropriate position (ie decline, the lowest dose does not enter the lower end of the filling lever plate hole)
b Turn the main motor of the gate clip Yang fell to the lowest level;
c unscrew the filler rod so that the rod parallel to the lower surface of the upper end of the dose tray;
d note the time scale on the number of shows for the new datum; |
